YAMAHA 01V96I數字調音臺

所屬分類：日本YAMAHA調音臺
點擊次數：
發布日期：2017/11/25
產品編號：1511578373
產品價格：0
在線詢價

詳細介紹

01V96i 技術規格

Outline		01V96i
Mixing capability	Mixing channels	32 Mono + 4 Stereo
	GROUP	8
	AUX	8
	MAIN	Stereo
	Input channel functions	Gate Attenuator 4-band PEQ 2x Compressor Delay Pan
	Output channel functions	Attenuator 4-band PEQ Compressor Delay
	On-board processors	4x SPX multi effectors
I/O	Mic inputs	12
	Phantom power	+48V DC; ON/OFF per 4ch
	Line inputs	2x Stereo 2x 2tr in
	AD converter	24-bit; 128-time over sampling
	Line outputs	Stereo output Monitor output 4x Omni output
	DA converter	24-bit; 128-time over sampling
	Digital I/O	ADAT (8-in/8-out) 2tr in/out
	Expansion slots	Mini-YGDAI (16-in/16-out)
	Control and others	To Host(USB) MIDI Word clock I/O
General specifications		01V96i
Internal processing		32bit Accumulator: 58bit
Sampling frequency rate	Internal	44.1 kHz 48 kHz 88.2 kHz 96 kHz
Sampling frequency rate	External	44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%)
Signal delay		Less than 1.6ms CH INPUT to STEREO OUT (@SampIing frequency = 48kHz) / Less than 0.8ms CH INPUT to STEREO OUT (@SampIing frequency = 96kHz)
Total harmonic distortion		CH INPUT to STEREO OUT: Less than 0.05% 20Hz to 20kHz @+14dBu into 600Ω / Less than 0.01% 1kHz @+24dBu into 600Ω (@SampIing frequency = 48kHz) / Less than 0.05% 20Hz to 40kHz @+14dBu into 600Ω / Less than 0.01% 1kHz @+24dBu into 600Ω (@SampIing frequency = 96kHz)
Frequency response		CH INPUT to STEREO OUT: 0.5 -1.5dB 20Hz - 20kHz @+4dBu into 600Ω(@SampIing frequency = 48kHz) / 0.5 -1.5dB 20Hz - 40kHz @+4dBu into 600Ω(@SampIing frequency = 96kHz)
Dynamic range		110dB typ. DA Converter (STEREO OUT) / 105dB typ. AD+DA (to STEREO OUT) @fs=48kHz / 105dB typ. AD+DA (to STEREO OUT) @fs=96kHz
Hum & noise level	Equivalent input noise	-128dBu Equivalent Input Noise.
Hum & noise level	Residual output noise	-86dBu residual output noise. STEREO OUT: STEREO OUT off. / -86dBu (90dB S/N) STEREO OUT: STEREO fader at nominal level and all CH INPUT faders at minimum level. / -64dBu (68dB S/N) STEREO OUT: STEREO fader at nominal level and one CH INPUT fader at nominal level
Crosstalk		-80dB adjacent input channels (CH1-12) / -80dB adjacent input channels (CH13-16) / -80dB input to output
Power requirements		AC100V 120V 220-240V 50/60 Hz
Power consumption		90W
Dimensions	W	436mm; 17-1/8in
	H	148mm; 5-7/8in
	D	548mm; 21-5/8in
Net weight		14kg; 30.86lbs
Others		Fader: 100mm motorized x17

Analog input characteristics

Input terminal	PAD	GAIN	Actual load impedance	For use with nominal	Input level			Connector
Input terminal	PAD	GAIN	Actual load impedance	For use with nominal	Sensitivity	Nominal	Max. before clip	Connector
CH INPUT 1 to 12	0	-60dB	3kohms	50-600ohm Mics & 600ohm Lines	-70dBu	-60dBu	-40dBu	A:XLR-3-31 type (Balanced) B:TRS phone jack (Balanced)
	0	-16dB			-26dBu	-16dBu	+4dBu
	20	-16dB			-6dBu	+4dBu	+24dBu
CH INPUT 13 to 16		-26dB	10kohms	600ohm Lines	-36dBu	-26dBu	-6dBu	TRS phone jack (Balanced)
CH INPUT 13 to 16		+4dB	10kohms	600ohm Lines	-6dBu	+4dBu	+24dBu	TRS phone jack (Balanced)
CH INSERT IN 1 to 12			10kohms	600ohm Lines	-12dBu	-2dBu	+18dBu	TRS phone jack (Unbalanced)
2TR IN [L,R]			10kohms	600ohm Lines	-10dBV	-10dBV	+10dBV	RCA pin jack (Unbalanced)

Analog output characteristics

Output terminal	Actual source impedance	For use with nominal	Output level		Connector
Output terminal	Actual source impedance	For use with nominal	Nominal	Max. before clip	Connector
STEREO OUT L,R	75ohms	600ohm Lines	+4dBu	+24dBu	XLR-3-32 type (Balanced)
OMNI OUT 1 to 4	150ohms	10kohm Lines	+4dBu	+24dBu	TRS phone jack (Balanced)
MONITOR OUT L,R	150ohms	10kohm Lines	+4dBu	+24dBu	TRS phone jack (Balanced)
CH INSERT OUT 1 to 12	600ohms	10kohm Lines	-2dBu	+18dBu	TRS phone jack (Unbalanced)
2TR OUT [L,R]	600ohms	10ohm Lines	-10dBV	+10dBV	RCA pin jack (Unbalanced)
PHONES	100ohms	8ohm Lines	4mW	25mW	ST phone jack (Unbalanced)
PHONES	100ohms	40ohm Lines	12mW	75mW	ST phone jack (Unbalanced)

Digital input characteristics

Terminal	Format	Data length	Level	Connector
2TR IN DIGITAL	IEC-60958	24bit	0.5Vpp/75ohms	RCA pin jack
ADAT IN	ADAT	24bit	-	OPTICAL

Digital output characteristics

Terminal	Format	Data length	Level	Connector
2TR OUT DIGITAL	IEC-60958 Consumer use	24bit	0.5Vpp/75ohms	RCA pin jack
ADAT OUT	ADAT	24bit	-	OPTICAL

Digital input/output characteristics

Terminal	Format	Data length	Level	Connector
USB	USB2.0	24bit	-	B type USB connector

Control I/O characteristics

Terminal		Format	Level	Connector
TO HOST USB		USB	0V - 3.3V	B type USB connector
MIDI	IN	MIDI	-	DIN Connector 5P
	OUT	MIDI	-	DIN Connector 5P
	THRU	MIDI	-	DIN Connector 5P
WORD CLOCK	IN	-	TTL/75ohms	BNC Connector
WORD CLOCK	OUT	-	TTL/75ohms	BNC Connector